MUTOH ValueJet VJ1324X Operation Manual Download

Page: 84 / 264

Before using

VJ-1324X OPERATION MANUAL

3.6 Adjust Print

NOTE

• Perform micro adjustment if the printer is not fully adjusted after rough adjustment.

• In adjustment patterns, there are Adjust pattern ALL where all patterns will be adjusted and

Individual Adj. pattern where the patterns A to F can be adjusted individually.

3.6.2.1

Custom Confirmation Pattern

Using this menu, you can print out all of the confirmation patterns (A to F) and check the degree of
misalignment.

1. Turn ON the printer and load the roll media.

3.4.2 Setting Roll Media

2. Display the Adjust Print menu on the operation panel.

a. Press the [Menu] key on the operation panel.

•

“Menu1: Setup>” is displayed on the operation panel.

b. Press the [>] key on Operation panel to select “Set 1: User Type>”.

Summary of Contents for ValueJet VJ1324X









































































































































































































































































Search results

Summary of Contents for ValueJet VJ1324X

Reviews:

Related manuals for ValueJet VJ1324X

Brands by name

Popular brands

MUTOH ValueJet VJ1324X, Operation Manual

Search results

Summary of Contents for ValueJet VJ1324X

Reviews:

Related manuals for ValueJet VJ1324X

Brands by name

Popular brands