MUTOH ValueJet VJ1324X Operation Manual Download

Page: 215 / 264

VJ-1324X OPERATION MANUAL

Maintenance

6.2 Cleaning the printer

215

NOTE

• If you fail to remove blurs or incompleteness of printing in one Head cleaning, perform strong

cleaning.

• If blurs or lacking parts in printed media do not disappear with several times of Head cleaning, refer

to “

7 Troubleshooting

”, and take appropriate measures.

6.2.4

Cleaning the cleaning wiper

This section describes how to clean the cleaning wiper.

(1) Time for cleaning

Once a week, or when blurs or lacking parts appear on printed media after Head cleaning.

(2) Cleaning procedures

Follow the procedure below to clean the cleaning wiper.

NOTE

• Use the cleaning stick to clean the cleaning wiper.

For details of the cleaning stick, refer to “

8.3 Options/Supply list

”.

1. If the printer is turned ON, make sure the following.

•

Printing or other operations are not in progress.

•

The operation panel display is Normal.

2. Display the CR Maintenance menu on the operation panel.

a. Press the [Menu] key on the operation panel.

•

“Menu1: Setup>” is displayed on the operation panel.

Summary of Contents for ValueJet VJ1324X









































































































































































































































































Search results

Summary of Contents for ValueJet VJ1324X

Reviews:

Related manuals for ValueJet VJ1324X

Brands by name

Popular brands

MUTOH ValueJet VJ1324X, Operation Manual

Search results

Summary of Contents for ValueJet VJ1324X

Reviews:

Related manuals for ValueJet VJ1324X

Brands by name

Popular brands