MUTOH ValueJet VJ1324X Operation Manual Download

Page: 122 / 264

Handling the printer

VJ-1324X OPERATION MANUAL

122

4.3 Menu setups on the operation panel

•

The previous setup menu is displayed.

•

When the main menu is displayed, the screen turns to Normal.

4.3.2

Panel setup menu overview

This section explains the Panel setup menu of the printer.
There are the following items in the Panel setup menu.

TIP

•For details of each setup item, refer to “

Panel setup menu

”.

Setup item

Description

Setup menu

Various settings of the printer are configured.

Test Print menu

Performs nozzle check of the print head and setup list.

Cleaning menu

Performs head cleaning.

Menu Option menu

Sets up the contents of the Setup menu.

Version menu

Displays the versions of the firmware.

Sleep Mode menu

Sleep mode settings are configured.

Display menu

Sets the language and unit displayed on the LCD monitor of the operation panel.

Job status

Displays information about the previous printing result.

Summary of Contents for ValueJet VJ1324X









































































































































































































































































Search results

Summary of Contents for ValueJet VJ1324X

Reviews:

Related manuals for ValueJet VJ1324X

Brands by name

Popular brands

MUTOH ValueJet VJ1324X, Operation Manual

Search results

Summary of Contents for ValueJet VJ1324X

Reviews:

Related manuals for ValueJet VJ1324X

Brands by name

Popular brands