MUTOH ValueJet VJ1324X Operation Manual Download Page 64

Page: 64 / 264

Before using

VJ-1324X OPERATION MANUAL

3.5 Test print

3.5.1

Nozzle check

It is used to check whether there are any clogged heads, or missing or blurred prints.

NOTE

• If the nozzle check result indicates that the checked points are blurred or missing, clean the head.

6.2.3 Head cleaning

Perform the nozzle check once again at the end of the work.

TIP

•Refer to the following for printing procedure.

3.5 Test print

•The printer information (date and time of printing, printer’s serial number, firmware version) is printed on the nozzle
check pattern.

No nozzle clog

Nozzle clogged

Summary of Contents for ValueJet VJ1324X









































































































































































































































































Search results

Summary of Contents for ValueJet VJ1324X

Reviews:

Brands by name

Popular brands

MUTOH ValueJet VJ1324X, Operation Manual

Search results

Summary of Contents for ValueJet VJ1324X

Reviews:

Brands by name

Popular brands