MUTOH ValueJet VJ1324X Operation Manual Download

Page: 197 / 264

VJ-1324X OPERATION MANUAL

Maintenance

6.1 Replacing consumable components

197

3. Take out the new ink cartridge from the bag.

NOTE

• Open the bag just before attaching the ink cartridge to the ink cartridge slot.

Leaving the ink cartridge with the bag open for a long time may result in abnormal printing.

• Do not insert or remove the ink cartridge more than 10 times.

If the ink cartridge has been removed/inserted more than 10 times, it cannot be used even though
ink remains.

4. Install a new ink cartridge.

5. Confirm that the operation panel returns to Normal.

NOTE

• If the ink cartridge is replaced during printing, printing resumes.

•

Ink cartridge replacement is complete.

Summary of Contents for ValueJet VJ1324X









































































































































































































































































Search results

Summary of Contents for ValueJet VJ1324X

Reviews:

Related manuals for ValueJet VJ1324X

Brands by name

Popular brands

MUTOH ValueJet VJ1324X, Operation Manual

Search results

Summary of Contents for ValueJet VJ1324X

Reviews:

Related manuals for ValueJet VJ1324X

Brands by name

Popular brands