MUTOH ValueJet VJ1324X Page 176 Operation Manual Download

Page: 176 / 264

Panel setup menu

VJ-1324X OPERATION MANUAL

176

5.1 Setup menu

5.1.21 Life Times menu

Displays the operational life time of each part.

5.1.22 IP Address menu

Sets the IP address of the printer.

NOTE

• Be sure to set the IP address after consulting the network administrator.

Setup item

Setting

Description

Life Times

Head

Display the operational life of each part.
•The lifetime of each part is indicated by the asterisks
(Maximum 5 asterisks: 100% left).

• As the part deteriorates, the number of asterisks decreases

one by one (20 %).

• The part should be changed when all of the asterisks have

disappeared, and “Change” is displayed.
Contact your local MUTOH dealer to ask for replacing
parts.

Pump

CR Motor

PF Motor

—

• [Cancel] key: shifts to the previous menu.

5.1 Setup menu

Setup item

Setting

Description

IP Address

000.000.000.000 to
<192.168.001.253> to
255.255.255.255

Change the IP address by operating the following keys.

• [+] key: increases the setting value.

• [–] key: decreases the setting value.

• [Enter] key: changes the setting for the next segment.

—

• [Cancel] key: saves the setting and shifts to the previous

menu.

5.1 Setup menu

Summary of Contents for ValueJet VJ1324X









































































































































































































































































Search results

Summary of Contents for ValueJet VJ1324X

Reviews:

Related manuals for ValueJet VJ1324X

Brands by name

Popular brands

MUTOH ValueJet VJ1324X, Operation Manual

Search results

Summary of Contents for ValueJet VJ1324X

Reviews:

Related manuals for ValueJet VJ1324X

Brands by name

Popular brands