MUTOH ValueJet VJ1324X Page 182 Operation Manual Download

Page: 182 / 264

Panel setup menu

VJ-1324X OPERATION MANUAL

182

5.3 Cleaning menu

5.3

Cleaning menu

Performs head cleaning.

TIP

•Head cleaning can be operated when the printer is Normal.
Refer to the following for operation procedures.

6.2.3 Head cleaning

Setup item

Description

Short

Discharges smaller amount of ink compared to “Normal”.

Normal

Select this mode normally.

Long

Discharges larger amount of ink compare to “Normal”.
Used when the print head does not improve by normal Head cleaning.

Little Charge

Discharges larger amount of ink compare to “Long”.
Charge a small amount of ink when printing is not stable after initial ink charge.

3.3 Installing ink cartridges

Initial Charge

Perform this when using the high capacity pack adapter for the first time, for the printer whose
ink is charged.

3.3.3 When using the high capacity pack adapter for the printer whose ink

is charged for the first time

—

• [Enter] key:

“Cleaning **%” is displayed on the operation panel and Head cleaning starts.
Progress on the Head cleaning is displayed in % on the operation panel.

• [Cancel] key: shifts to the previous menu.

Panel setup menu

Summary of Contents for ValueJet VJ1324X









































































































































































































































































Search results

Summary of Contents for ValueJet VJ1324X

Reviews:

Related manuals for ValueJet VJ1324X

Brands by name

Popular brands

MUTOH ValueJet VJ1324X, Operation Manual

Search results

Summary of Contents for ValueJet VJ1324X

Reviews:

Related manuals for ValueJet VJ1324X

Brands by name

Popular brands