manualshive.com logo in svg

MUTOH ValueJet VJ1324X, Operation Manual

Share
Download
MUTOH ValueJet VJ1324X Operation Manual Download Page 48

Before using

VJ-1324X OPERATION MANUAL

48

3.3  Installing ink cartridges

5. Insert the high capacity pack adapters into the ink cartridge slot.

NOTE

• Do not insert the high capacity pack adapter into the ink cartridge slot without a cleaning fluid bag 

attached.
The information of the remaining amount will be overwritten and the cleaning fluid bag will not be 
usable.

•

Insert the high capacity pack adapter all the way to the end of the slot.

•

When all high capacity pack adapters are installed, “Busy-Washing” is displayed on the 
operation panel, and the printer starts charging the cleaning fluid.

•

When the cleaning fluid has been charged, “Remove Cartridges” is displayed on the operation 
panel.

6. Remove all the high capacity pack adapters.

No.

Name

1

High capacity pack adapter

2

Ink cartridge slots

No.

Name

1

High capacity pack adapter

1

2

1

Summary of Contents for ValueJet VJ1324X









































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands