manualshive.com logo in svg

MUTOH ValueJet VJ1324X, Operation Manual

Share
Download
MUTOH ValueJet VJ1324X Operation Manual Download Page 220

Maintenance

VJ-1324X OPERATION MANUAL

220

6.2  Cleaning the printer

•

The printer enters Normal.

•

Cleaning the cleaning wiper is complete.

6.2.5

Cleaning around the print head

This section describes how to clean around the print head.

(1) Time for cleaning

When foreign substances such as dust or ink clump that can cause missing dots or ink leakage is attached 
around the print head

(2) Cleaning procedures

Follow the procedure below to clean around the print head.

NOTE

• Before cleaning around the print head, read this procedure thoroughly to fully understand it, and 

clean promptly and correctly.

• While cleaning around the print head, the print head cap is removed, therefore cleaning must be 

done before the print head dries.
This operation should be done within 15 minutes.
If the operation lasts over 15 minutes, follow the Steps 8 and 9 to stop the operation and perform 
head cleaning, then resume cleaning.

6.2.3 Head cleaning

• Use the cleaning stick to clean around the print head.

For details of the cleaning stick, refer to “

8.3 Options/Supply list

”.

1. If the printer is turned ON, make sure the following.

•

Printing or other operations are not in progress.

•

The operation panel display is Normal.

Summary of Contents for ValueJet VJ1324X









































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands