MUTOH ValueJet VJ1324X Operation Manual Download Page 228

Page: 228 / 264

Maintenance

VJ-1324X OPERATION MANUAL

228

6.3 Disposal of waste fluids

3. Open the waste fluid valve, and transfer the waste fluid to the container.

NOTE

• When transferring the waste fluid to the empty container, the waste fluid may spatter.

Make sure to put the container close to the waste fluid valve.

4. After pouring the waste fluid to the empty container, close the waste fluid valve securely.

5. Wipe the opening of the waste fluid valve with a cloth, etc.

6. Dispose of the waste fluid as an industrial waste product.

•

Disposal of waste fluids is completed.

No.

Name

Waste fluid valve

Empty container

No.

Name

Waste fluid valve

Summary of Contents for ValueJet VJ1324X









































































































































































































































































Search results

Summary of Contents for ValueJet VJ1324X

Reviews:

Brands by name

Popular brands

MUTOH ValueJet VJ1324X, Operation Manual

Search results

Summary of Contents for ValueJet VJ1324X

Reviews:

Brands by name

Popular brands