manualshive.com logo in svg

MUTOH ValueJet VJ1324X, Operation Manual

Share
Download
MUTOH ValueJet VJ1324X Operation Manual Download Page 189

VJ-1324X OPERATION MANUAL

Panel setup menu

5.6  Sleep Mode menu

189

5.6.2

Sleep Mode Start menu

Activate Sleep Mode
During Sleep Mode, “Restart –> Enter” will be displayed in the operation panel.
During Sleep Mode, pressing [Enter] key will return the printer to normal operation.

NOTE

• If the printer is under one of the following conditions while shifting to the Sleep Mode, “Don’t Start 

Sleep Mode” is displayed, and will not shift to the Sleep Mode.

• The front cover is open.

• Maintenance cover is open.

• The media loading lever is raised.

• The waste fluid tank is full.

• The ink cartridge is empty.

• The ink cartridge has been removed.

• An object other than an appropriate ink cartridge is inserted in the cartridge slot, etc.

Activate Sleep Mode again after returning the printer to a normal state.

7.2 Error messages

• If the printer is under one of the conditions above during the Sleep mode, the printer will not return 

to the Normal condition even pressing the [Enter] key.
Return the printer to a normal state, and press the [Enter] key to return the printer to normal 
operation.

7.2 Error messages

Setup item

Setting

Description

Start

Start Sleep Mode?

• [Enter] key: activates Sleep Mode.

• [Cancel] key: shifts to the previous menu without activating 

Sleep Mode.

5.6 Sleep Mode menu

Restart –> Enter

The printer is in Sleep Mode.

• [Enter] key: return the printer to normal operation.

Summary of Contents for ValueJet VJ1324X









































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands