MUTOH ValueJet VJ1324X Operation Manual Download

Page: 39 / 264

VJ-1324X OPERATION MANUAL

Before using

3.2 Turning the power ON/OFF

3.2.2

Turning the power OFF

Follow the procedure below to turn the printer OFF.

1. Verify the following regarding the operational condition of the product.

•

Printing or other operations are not in progress.

•

The operation panel display is Normal.

•

The Low lamp on the operation panel lights up in green.

NOTE

• If the High lamp on the operation panel lights up in green, the head height is set to High.

Return the head height to Low before turning the power OFF.

4.2.5.2 When returning the print head to the original position

2. Press the [Power] key on the operation panel to turn OFF the printer.

•

The Power lamp on the operation panel is turned off.

NOTE

• If the operation panel is in the following status, the power is ON.

• The [Power] key is pressed in.

• Power lamp is on (blue).

Press the key once again to turn OFF the power.

•

The printer starts the procedure to turn the power OFF.

•

“Power Off” is displayed on the operation panel.

Summary of Contents for ValueJet VJ1324X









































































































































































































































































Search results

Summary of Contents for ValueJet VJ1324X

Reviews:

Related manuals for ValueJet VJ1324X

Brands by name

Popular brands

MUTOH ValueJet VJ1324X, Operation Manual

Search results

Summary of Contents for ValueJet VJ1324X

Reviews:

Related manuals for ValueJet VJ1324X

Brands by name

Popular brands