MUTOH ValueJet VJ1324X Operation Manual Download Page 40

Page: 40 / 264

Before using

VJ-1324X OPERATION MANUAL

3.2 Turning the power ON/OFF

NOTE

• If the head height is set to High, “Set Height to Low” is displayed on the operation panel and the

procedure to turn the power OFF stops.
To restart the procedure, return the head height to Low.

4.2.5.2 When returning the print head to the original position

•

All the lamps on the operation panel and the LCD monitor are turned OFF.

•

The printer automatically turns the power OFF.

NOTE

• If there is a problem during turning OFF operation, a message is displayed on the operation panel

and the printer may stop operating.
If operation stops, refer to “

7 Troubleshooting

” and deal with the problem.

• After turning OFF the printer, wait for ten seconds or longer to turn it ON again.

3. Raise the media loading lever when the product is not used for a long time.

No.

Name

Media loading lever

Summary of Contents for ValueJet VJ1324X









































































































































































































































































Search results

Summary of Contents for ValueJet VJ1324X

Reviews:

Brands by name

Popular brands

MUTOH ValueJet VJ1324X, Operation Manual

Search results

Summary of Contents for ValueJet VJ1324X

Reviews:

Brands by name

Popular brands