manualshive.com logo in svg

MUTOH ValueJet VJ1324X, Operation Manual

Share
Download
MUTOH ValueJet VJ1324X Operation Manual Download Page 124

Handling the printer

VJ-1324X OPERATION MANUAL

124

4.4  Operating from the operation panel

4.4.2

Stopping printing operation

If you want to stop printing for some reason, operate as follows.

1. Stop sending printing data from the computer to the printer.

2. Press the [Cancel] key on the operation panel for two seconds.

•

The printer operates as follows.

NOTE

• If a large amount of data is saved on the printer, the operation panel may not return to Normal by a 

single [Cancel] key operation.
In such cases, wait for a few seconds and press the [Cancel] key again.

Printer status

Operation with the [Cancel] key pressed for two seconds

During printing

Terminates the printing, and deletes one data remaining in the printer.

Receiving data/analyzing data Deletes the data already received and converted.

Summary of Contents for ValueJet VJ1324X









































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands