MUTOH ValueJet VJ1324X Operation Manual Download

Page: 133 / 264

VJ-1324X OPERATION MANUAL

Panel setup menu

133

Panel setup menu

The section explains the Setup menu of the printer.

TIP

The < > parts in each list are factory default settings (default).

Setup item

Description

Setup menu

Various settings of the printer are configured.

5.1 Setup menu

Test Print menu

Performs nozzle check of the print head and setup list.

5.2 Test Print Menu

Cleaning menu

Performs head cleaning.

5.3 Cleaning menu

Menu Option menu

Sets up the contents of the Setup menu.

5.4 Menu Option menu

Version menu

Displays the versions of the firmware.

5.5 Version menu

Sleep Mode menu

Sleep mode settings are configured.

5.6 Sleep Mode menu

Display

Sets the language and unit displayed on the LCD monitor of the operation panel.

5.7 Display menu

Job Status menu

Displays information about the previous printing result of the Job status.

5.8 Job Status Menu

Summary of Contents for ValueJet VJ1324X









































































































































































































































































Search results

Summary of Contents for ValueJet VJ1324X

Reviews:

Related manuals for ValueJet VJ1324X

Brands by name

Popular brands

MUTOH ValueJet VJ1324X, Operation Manual

Search results

Summary of Contents for ValueJet VJ1324X

Reviews:

Related manuals for ValueJet VJ1324X

Brands by name

Popular brands