MUTOH ValueJet VJ1324X Operation Manual Download Page 92

Page: 92 / 264

Before using

VJ-1324X OPERATION MANUAL

3.6 Adjust Print

4. Check the both ends and the center of the print result that printed with Adjust pattern, and select the

number from 1 to 11 that is not out of alignment.

•

“9” is selected in the following pattern.

NOTE

• “6” is the current setting value.

• When the line is aligned, the bold line on its left side does not have a white vertical line in the

middle.

•

“PatternA: 6” is displayed on the operation panel.

5. Press the [+] key or [–] key to enter the number that you selected in Step 4.

NOTE

• When you press the [Cancel] key on Operation panel, the setting value is not entered and the display

returns to “Adj.2: RoughPtn. ALL”.

Not adequate

Adequate

Not adequate

Summary of Contents for ValueJet VJ1324X









































































































































































































































































Search results

Summary of Contents for ValueJet VJ1324X

Reviews:

Brands by name

Popular brands

MUTOH ValueJet VJ1324X, Operation Manual

Search results

Summary of Contents for ValueJet VJ1324X

Reviews:

Brands by name

Popular brands