MUTOH ValueJet VJ1324X Page 231 Operation Manual Download

Page: 231 / 264

VJ-1324X OPERATION MANUAL

Maintenance

6.4 Moving or transporting the printer

231

(2) Reinstalling

After moving the printer, follow the procedure below to set it ready for use.

1. Select a suitable place for installation.

Installation manual

2. Move and install the printer to the location.

3. When using the stands, make sure that the stands and the wing bolts (2 pieces) retaining the printer

are not loose.

4. Attach cables, such as the power cable.

3.1 Power cable connection

3.7 Connecting the printer to PC

5. Perform Nozzle check, and then confirm that there is no clogging in the print head.

3.5.1 Nozzle check

6. Perform Alignment.

3.6 Adjust Print

6.4.2

Transporting the printer

When transporting the printer, make sure to pack it in the same condition as purchased, using protective
and packing materials to protect the printer from vibration and shocks.

NOTE

• When transporting the printer, consult the MUTOH product dealer at your point of purchase.

Summary of Contents for ValueJet VJ1324X









































































































































































































































































Search results

Summary of Contents for ValueJet VJ1324X

Reviews:

Related manuals for ValueJet VJ1324X

Brands by name

Popular brands

MUTOH ValueJet VJ1324X, Operation Manual

Search results

Summary of Contents for ValueJet VJ1324X

Reviews:

Related manuals for ValueJet VJ1324X

Brands by name

Popular brands