MUTOH ValueJet VJ1324X Operation Manual Download Page 202

Page: 202 / 264

Maintenance

VJ-1324X OPERATION MANUAL

202

6.1 Replacing consumable components

5. Hold the movable media stopper and lightly tap it as illustrated to remove the movable media

stopper.

NOTE

• When removing the roll media, do not strike the left edge of the scroller (on the movable media

stopper side) strongly on the floor. The left edge of the scroller may be damaged by the impact.

6. Remove the roll media from the scroller.

7. To load another roll media, refer to the following.

TIP

•For loading the roll media, refer to “

3.4 Loading media

”.

•For storing the roll media not in use, refer to “

4.2.3 Precaution on storing media

”.

No.

Name

Movable media stopper

Scroller

No.

Name

Roll media

Scroller

Summary of Contents for ValueJet VJ1324X









































































































































































































































































Search results

Summary of Contents for ValueJet VJ1324X

Reviews:

Brands by name

Popular brands

MUTOH ValueJet VJ1324X, Operation Manual

Search results

Summary of Contents for ValueJet VJ1324X

Reviews:

Brands by name

Popular brands