MUTOH ValueJet VJ1324X Operation Manual Download

Page: 208 / 264

Maintenance

VJ-1324X OPERATION MANUAL

208

6.1 Replacing consumable components

8. Press the tab of the cutter lightly, return the cutter holder to its initial position.

NOTE

• Do not press the tab of the cutter strongly or suddenly let go of it.

There is a spring in the cutter holder and it may fly out.

• Do not push the cutter all the way in.

The cutter blade may damage the inside of the printer.

• Refer to the illustrations below and install the cutter holder correctly.

If it is not installed correctly, it may cause an error.
If an error occurs, check if the cutter holder is installed correctly.

9. Close Maintenance cover.

No.

Name

Razor blade

No.

Name

Cutter holder

Cutter holder lever

No.

Name

Maintenance cover

Summary of Contents for ValueJet VJ1324X









































































































































































































































































Search results

Summary of Contents for ValueJet VJ1324X

Reviews:

Related manuals for ValueJet VJ1324X

Brands by name

Popular brands

MUTOH ValueJet VJ1324X, Operation Manual

Search results

Summary of Contents for ValueJet VJ1324X

Reviews:

Related manuals for ValueJet VJ1324X

Brands by name

Popular brands