MUTOH ValueJet VJ1324X Operation Manual Download

Page: 34 / 264

Before using

VJ-1324X OPERATION MANUAL

3.1 Power cable connection

3.1

Power cable connection

This section explains power cable connection.

WARNING

• Be sure to use the specified power cable.

Using power cables other than the specified can cause an electric shock or fire.

• Use a power cord set which is compatible with the safety standards, power supply

voltage, and plug shape used in the country where this printer is used.

• Use a power cord set which is equipped with a protective earth, and securely

connect it to the outlet.

• Do not use a damaged power cable.

It could lead to an electric shock and fire.

CAUTION

• Pay attention to the following points when handling power cable.

• Do not tamper with the power cable.

• Do not put heavy objects on the power cable.

• Do not bend, twist or pull the power cable by force.

• Do not route the power cable near heating appliances.

NOTE

• Contact your local MUTOH dealer in case of power cable damage.

• This product is also designed for IT power distribution system with phase-to-phase voltage 230V.

Summary of Contents for ValueJet VJ1324X









































































































































































































































































Search results

Summary of Contents for ValueJet VJ1324X

Reviews:

Related manuals for ValueJet VJ1324X

Brands by name

Popular brands

MUTOH ValueJet VJ1324X, Operation Manual

Search results

Summary of Contents for ValueJet VJ1324X

Reviews:

Related manuals for ValueJet VJ1324X

Brands by name

Popular brands