MUTOH ValueJet VJ1324X Page 47 Operation Manual Download

Page: 47 / 264

VJ-1324X OPERATION MANUAL

Before using

3.3 Installing ink cartridges

3.3.2

Installing high capacity pack adapters (option)

Use the optional high capacity pack adapters to use the 1,000 ml ink bags on this printer.

Follow the procedure below to install the high capacity pack adapters.

1. Turn the printer ON.

•

The printer starts the initializing operation.

•

After the initial operation is compete, “Start Ink Charge – > E” is displayed on the operation
panel.

2. Press the [Enter] key on the operation panel.

•

“Insert Cleaning cart.” is displayed on the operation panel.

3. Take out the cleaning fluid bags (4 pieces) from the bag.

4. Install the cleaning fluid bag and smart chip card to the high capacity pack adapters.

NOTE

• To install or remove the cleaning fluid bag and smart chip card to/from the high capacity pack

adapter, refer to the operation manual included with high capacity pack adapter.

Summary of Contents for ValueJet VJ1324X









































































































































































































































































Search results

Summary of Contents for ValueJet VJ1324X

Reviews:

Related manuals for ValueJet VJ1324X

Brands by name

Popular brands

MUTOH ValueJet VJ1324X, Operation Manual

Search results

Summary of Contents for ValueJet VJ1324X

Reviews:

Related manuals for ValueJet VJ1324X

Brands by name

Popular brands