MUTOH ValueJet VJ1324X Page 241 Operation Manual Download

Page: 241 / 264

VJ-1324X OPERATION MANUAL

Troubleshooting

7.2 Error messages

241

7.2

Error messages

This section describes messages displayed during normal printer operation or when errors occur, and
solutions to the messages.

7.2.1

Status messages

When the product is operating correctly, each operation status is displayed on the operation panel as
below.

No.

Display

Description

Reference

Ready to Print

Standby (Media is loaded).

—

Media End

Standby (Media is not loaded).

—

Receiving

Receiving data.

—

Analyzing data

Analyzing data.

—

Printing

Under printing.

—

PrintRestart – > ENTER

Pausing printing.
Press the [Enter] key.

—

Warming Up

Warming up the heater.

—

Warming Up
Skip – > ENTER

Received the print data while the heater is
being heated.
To start printing before the heater is warmed
up, press the [Enter] key. Reference

4.4.7 Start

Printing during
Warm up

Cleaning **%

Cleaning the head.
Please wait a while.

6.2.3 Head

cleaning

Ink Refill **%

Charging the ink.
Please wait a while.

3.3 Installing

ink cartridges

During Washing

Washing the print head by the head washing
operation.
Please wait a while.

3.3 Installing

ink cartridges

Moving Origin Pos.

The print head is moving to the original
printing position in the Origin menu.
Please wait a while.

5.1.8 Origin

menu

Confirm Position – >E

The print head is moving to the original
printing position in the Origin menu.
Press the [Enter] key.

5.1.8 Origin

menu

Head Cleaning

Cleaning Head.
Wait for a moment.

5.1.18

Longstore menu

Remove Cartridges

Performs head cleaning.
Remove cartridges.

5.1.18

Longstore menu

** Initialing **

Initializing the setting in the Initialization
menu.
Please wait a while.

5.1.20

Initialization menu

Summary of Contents for ValueJet VJ1324X









































































































































































































































































Search results

Summary of Contents for ValueJet VJ1324X

Reviews:

Related manuals for ValueJet VJ1324X

Brands by name

Popular brands

MUTOH ValueJet VJ1324X, Operation Manual

Search results

Summary of Contents for ValueJet VJ1324X

Reviews:

Related manuals for ValueJet VJ1324X

Brands by name

Popular brands