MUTOH ValueJet VJ1324X Page 121 Operation Manual Download

Page: 121 / 264

VJ-1324X OPERATION MANUAL

Handling the printer

4.3 Menu setups on the operation panel

121

4. The setting in the blinking part on the LCD monitor of the operation panel can be changed.

Press the [+] key or [-] key to change the set value.

5. To save the changed setting, press the [Enter] key on the operation panel.

•

The setting is saved and the next setup item is displayed.

NOTE

• If you press the [Cancel] key, [+] key or [–] key without pressing [Enter] key after changing a

setting, the change will not be saved.

6. Press the [Cancel] key on the operation panel to exit from the setup.

Summary of Contents for ValueJet VJ1324X









































































































































































































































































Search results

Summary of Contents for ValueJet VJ1324X

Reviews:

Related manuals for ValueJet VJ1324X

Brands by name

Popular brands

MUTOH ValueJet VJ1324X, Operation Manual

Search results

Summary of Contents for ValueJet VJ1324X

Reviews:

Related manuals for ValueJet VJ1324X

Brands by name

Popular brands