manualshive.com logo in svg

MUTOH ValueJet VJ1324X, Operation Manual

Share
Download
MUTOH ValueJet VJ1324X Operation Manual Download Page 192

Panel setup menu

VJ-1324X OPERATION MANUAL

192

5.8  Job Status Menu

5.8

Job Status Menu

Various information of previous print will be displayed.

The length of printed data and if the print is completed will be displayed. When the print is canceled, the 
information how much the print is completed will be displayed.

TIP

•

This function is to check the information of print data with the print operation is completed.For the details on data 
while printing, please refer to the below.

4.4.5.2 Settings that can be changed or confirmed while printing
4.4.8 Normal Display while Printing

•

The values displayed in this function are just standard values, not guarantee the accuracy.

•

If the print data includes no length data, all information will be displayed as “0”.

Setup item

Setting

Description

Job Status

JobStatus

Displays if the print is completed.

• When the print is completed: “Completed”

• When the print is canceled: “Canceled”

ToDoLength

The total length of print data (media feeding direction) will be 
displayed.

Done

The printed length will be displayed.

Remain

The remaining length of print data will be displayed.

—

• [Cancel] key: cancels the setting and shifts to the previous 

menu.

 Panel setup menu

Summary of Contents for ValueJet VJ1324X









































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands