![background image](http://html.mh-extra.com/html/motorola/ap-5131-wireless-access-point/ap-5131-wireless-access-point_product-reference-manual_245459062.webp)
AP-51xx Access Point Product Reference Guide
2-18
4.
Cable the AP-5131 using either the Power Injector solution or an approved line cord and
power supply.
For Power Injector installations:
a. Connect a RJ-45 Ethernet cable between the network data supply (host) and the Power
Injector
Data In
connector.
b. Connect a RJ-45 Ethernet cable between the Power Injector
Data & Power Out
connector and the AP-5131 LAN port.
c. Ensure the cable length from the Ethernet source (host) to the Power Injector and
AP-5131 does not exceed 100 meters (333 ft). The Power Injector has no On/Off power
switch. The Power Injector receives power as soon as AC power is applied. For more
information on using the Power Injector, see
Power Injector and Power Tap Systems on
page 2-10
.
For standard 48-Volt Power Adapter (Part No. 50-14000-243R) and line cord installations:
a. Connect RJ-45 Ethernet cable between the network data supply (host) and the AP-5131
LAN port.
b. Verify the power adapter is correctly rated according the country of operation.
c. Connect the power supply line cord to the power adapter.
d. Attach the power adapter cable into the power connector on the AP-5131.
e. Plug the power adapter into an outlet.
5.
Verify the behavior of the AP-5131 LEDs. For more information, see
AP-5131 LED Indicators
on page 2-23
.
6.
Align the bottom of the ceiling T-bar with the back of the AP-5131.
CAUTION
Both the Dual and Single Radio model AP-5131s use RSMA type
antenna connectors. On a Dual Radio AP-5131, a single dot on the
antenna connector indicates the primary antenna for both Radio 1 (2.4
GHz) and Radio 2 (5.2 GHz). Two dots designate the secondary
antenna for both Radio 1 and Radio 2. On Single Radio models, a
single dot on the antenna connector indicates the primary antenna for
Radio 1, and two dots designate the secondary antenna for Radio 1
CAUTION
Do not supply power to the AP-5131 until the cabling of the unit is
complete.
!
!
Summary of Contents for AP 5131 - Wireless Access Point
