manualshive.com logo in svg

Motorola AP 5131 - Wireless Access Point, Product Reference Manual, Page: 123 / 698

Share
Download
Motorola AP 5131 - Wireless Access Point Product Reference Manual Download Page 123

System Configuration

4-31

4.5.2 Enabling SNMP Traps

SNMP provides the ability to send traps to notify the administrator that trap conditions are met. Traps 
are network packets containing data relating to network devices, or SNMP agents, that send the 
traps. SNMP management applications can receive and interpret these packets, and optionally can 
perform responsive actions. SNMP trap generation is programmable on a trap-by-trap basis.

Use the 

SNMP Traps Configuration 

screen to enable traps and to configure appropriate settings 

for reporting this information. Trap configuration depends on the network machine that receives the 
generated traps. SNMP v1/v2c and v3 trap configurations function independently. In a mixed SNMP 
environment, generated traps can be sent using configurations for both SNMP v1/v2c and v3.

To configure SNMP traps on the access point:

1.

Select

 

System Configuration

 - > 

SNMP Access

 - > 

SNMP Trap Configuration

 from the 

access point menu tree.

OK

Click 

Ok 

to return to the SNMP Access screen. Click 

Apply

 within 

the

 

SNMP Access screen to save any changes made on the SNMP 

Access Control screen.

Cancel 

Click 

Cancel 

to undo any changes made on the SNMP Access 

Control screen. This reverts all settings for this screen to the last 
saved configuration.

Summary of Contents for AP 5131 - Wireless Access Point



























































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments