Motorola AP 5131 - Wireless Access Point Product Reference Manual Download Page 129

Page: 129 / 698

System Configuration

4-37

Click

Undo Changes

(if necessary) to undo any changes made. Undo Changes reverts the

settings displayed on SNMP Traps screen to the last saved configuration.

Click

Logout

to securely exit the access point Access Point applet. A prompt displays

confirming the logout before the applet is closed.

4.5.4 Configuring SNMP RF Trap Thresholds

Use the

SNMP RF Trap Threshold

screen as a means to track RF activity and the access point’s

radio and associated MU performance. SNMP RF Traps are sent when RF traffic exceeds defined
limits set in the

RF Trap Thresholds

field of the SNMP RF Traps screen. Thresholds are displayed

for the access point, WLAN, selected radio and the associated MU.

To configure specific SNMP RF Traps on the access point:

Select

System Configuration

- >

SNMP Access

- >

SNMP RF Trap Thresholds

from

the menu tree.

Configure the

RF Trap Thresholds

field to define device threshold values for SNMP traps.

Summary of Contents for AP 5131 - Wireless Access Point



























































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for AP 5131 - Wireless Access Point

Reviews:

Motorola AP 5131 - Wireless Access Point, Product Reference Manual, Page: 129 / 698

Search results

Summary of Contents for AP 5131 - Wireless Access Point

Reviews: