manualshive.com logo in svg

Motorola AP 5131 - Wireless Access Point, Product Reference Manual, Page: 287 / 698

Share
Download
Motorola AP 5131 - Wireless Access Point Product Reference Manual Download Page 287

Configuring Access Point Security

6-69

3.

Click 

Apply 

to save any changes to the LDAP screen. Navigating away from the screen 

without clicking Apply results in all changes to the screen being lost.

4.

Click 

Undo Changes

 (if necessary) to undo any changes made. Undo Changes reverts the 

settings displayed on the LDAP screen to the last saved configuration.

5.

Click 

Logout 

to securely exit the Access Point applet. A prompt displays confirming the 

logout before the applet is closed.

LDAP Server IP

Enter the IP address of the external LDAP server acting as the data 
source for the Radius server. The LDAP server must be accessible 
from the WAN port or from the access point’s active subnet.

Port

Enter the TCP/IP port number for the LDAP server acting as a data 
source for the Radius. The default port is 389.

Login Attribute

Specify the login attribute used by the LDAP server for 
authentication. In most cases, the default value should work. 
Windows Active Directory users must use “sAMAccountName” as 
their login attribute to successfully login to the LDAP server.

Password Attribute

Enter the password used by the LDAP server for authentication.

Bind Distinguished 
Name

Specify the distinguished name used to bind with the LDAP server.

Password

Enter a valid password for the LDAP server.

Base Distinguished 
Name

Enter a name that establishes the base object for the search. The 
base object is the point in the LDAP tree at which to start 
searching.

Group Attribute

Define the group attribute used by the LDAP server.

Group Filter

Specify the group filters used by the LDAP server. 

Group Member 
Attribute

Enter the Group Member Attribute sent to the LDAP server when 
authenticating users.

CAUTION

Windows Active Directory users must set their Login Attribute to 
“sAMAccountName” in order to successfully login to the LDAP server.

!

Summary of Contents for AP 5131 - Wireless Access Point



























































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments