manualshive.com logo in svg

Motorola AP 5131 - Wireless Access Point, Product Reference Manual, Page: 281 / 698

Share
Download
Motorola AP 5131 - Wireless Access Point Product Reference Manual Download Page 281

Configuring Access Point Security

6-63

2.

Highlight an MU from within the 

Rogue AP enabled MUs

 field and click the scan button.

The target MU begins scanning for rogue devices using the detection parameters defined 
within the Rogue AP Detection screen. To modify the detection parameters, see 

Configuring 

Rogue AP Detection on page 6-55

.

Those devices detected as rogue APs display within the 

Scan Result

 table. Use the 

displayed AP MAC, ESSID and RSSI values to determine the device listed in the table is truly 
a rogue device or one inadvertently detected as a rogue AP.

3.

If necessary, highlight an individual MU from within the Scan Result field and click the

 Add 

to Allowed AP List

 button to move the AP into the Allowed APs table within the 

Active 

APs 

screen. 

4.

Additionally, if necessary, click the 

Add All to Allowed APs List

 button to move every 

device within the Scan Result table into the Allowed APs table within the 

Active APs 

screen. Only use this option if you are sure all of the devices detected and displayed within 
the Scan Results table are non-hostile APs.

Summary of Contents for AP 5131 - Wireless Access Point



























































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments