manualshive.com logo in svg

Motorola AP 5131 - Wireless Access Point, Product Reference Manual, Page: 170 / 698

Share
Download
Motorola AP 5131 - Wireless Access Point Product Reference Manual Download Page 170

AP-51xx Access Point Product Reference Guide

5-22

requests, and minimizes the number of WAN IP addresses needed when a range of local IP addresses 
is mapped to each WAN IP address. NAT can be applied in one of two ways:

•

One-to-one mapping with a private side IP address

The private side IP address can belong to any of the private side subnets.

•

One-to-many mapping with a configurable range of private side IP addresses

Ranges can be specified from each of the private side subnets.

To configure IP address mappings for the access point:

1.

Select

 

Network Configuration

 -> 

WAN 

-> 

NAT

 from the access point menu tree.

2.

Configure the 

Address Mappings 

field to generate a WAN IP address, define the NAT type 

and set outbound/inbound NAT mappings.

WAN IP Address

The WAN IP addresses on the NAT screen are dynamically 
generated from address settings applied on the 

WAN

 screen.

Summary of Contents for AP 5131 - Wireless Access Point



























































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments