manualshive.com logo in svg

Motorola AP 5131 - Wireless Access Point, Product Reference Manual, Page: 75 / 698

Share
Download
Motorola AP 5131 - Wireless Access Point Product Reference Manual Download Page 75

Hardware Installation

2-31

2.11 Setting Up MUs

For a discussion of how to initially test the access point to ensure it can interoperate with the MUs 
intended for its operational environment, see 

Basic Device Configuration on page 3-5

 and specifically 

Testing Connectivity on page 3-14

.

Refer to the 

LA-5030 & LA-5033 Wireless Networker PC Card and PCI Adapter Users Guide, 

available 

from the Motorola Web site, for installing drivers and client software if operating in an 802.11a/g 
network environment.

Refer to the 

Spectrum24 LA-4121 PC Card, LA-4123 PCI Adapter & LA-4137 Wireless Networker User 

Guide, 

available from the Motorola Web site, for installing drivers and client software if operating in 

an 802.11b network environment. 

Use the default values for the ESSID and other configuration parameters until the network connection 
is verified. MUs attach to the network and interact with the AP transparently.

Summary of Contents for AP 5131 - Wireless Access Point



























































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments