manualshive.com logo in svg

Motorola AP 5131 - Wireless Access Point, Product Reference Manual, Page: 146 / 698

Share
Download
Motorola AP 5131 - Wireless Access Point Product Reference Manual Download Page 146

AP-51xx Access Point Product Reference Guide

4-54

5.

If the target firmware file resides within a directory, specify a complete path for the file 
within the 

Filepath(optional)

 field.

6.

Enter an IP address for the FTP or TFTP server used for the update. Only numerical IP address 
names are supported, no DNS can be used.

7.

Select 

FTP

 or 

TFTP

 to define whether the firmware file resides on a FTP or TFTP server.

8.

Set the following FTP or TFTP parameters:

•

Username

 - Specify a username for the FTP server login.

•

Password 

- Specify a password for FTP server login. Default is motorola. A blank 

password is not supported.

9.

Click the 

Perform Update

 

button to initiate the update. Upon confirming the firmware 

update, the AP reboots and completes the update. 

10. After the AP reboots, return to the Firmware Update screen. Check the 

Status 

field to verify 

whether the firmware update was successful. If an error occurs, one of the following error 
messages will display:

 

FAIL: auto fw update check

FAIL: network activity time out

FAIL: firmware check

FAIL: exceed memory limit

FAIL: authentication

FAIL: connection time out

FAIL: control channel error

FAIL: data channel error

FAIL: channel closed unexpected

FAIL: establish data channel

FAIL: accept data channel

NOTE

Click 

Apply

 to save the settings before performing the firmware update. 

The user is not able to navigate the access point user interface while the 
firmware update is in process.

NOTE

The access point must complete the reboot process to successfully update 
the device firmware, regardless of whether the reboot is conducted using 
the GUI or CLI interfaces.

Summary of Contents for AP 5131 - Wireless Access Point



























































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments