manualshive.com logo in svg

Motorola AP 5131 - Wireless Access Point, Product Reference Manual, Page: 192 / 698

Share
Download
Motorola AP 5131 - Wireless Access Point Product Reference Manual Download Page 192

AP-51xx Access Point Product Reference Guide

5-44

9.

Click

 Apply 

to save any changes to the New QoS Policy or Edit QoS Policy screen to return 

to the Quality of Service Configuration screen. Navigating away from the screen without 
clicking Apply results in all changes to the screens being lost.

10. Click 

Cancel 

to securely exit the New QoS Policy or Edit QoS Policy screen and return to the 

Quality of Service Configuration screen. 

11. Click 

Logout

 within the Quality of Service Configuration screen to securely exit the Access 

Point applet. A prompt displays confirming the logout before the applet is closed.

U-APSD (WMM Power Save) Support

The access point now supports 

Unscheduled Automatic Power Save Delivery

 (U-APSD), often referred 

to as WMM Power Save. U-APSD provides a periodic frame exchange between a voice capable MU 
and the access point during a VoIP call, while legacy power management is still utilized for typical 
data frame exchanges. The access point and its associated MU activate the new U-APSD power save 
approach when a VoIP traffic stream is detected. The MU then buffers frames from the voice traffic 
stream and sends a VoIP frame with an implicit "poll" request to its associated access point. The 
access point responds to the poll request with buffered VoIP stream frame(s). When a voice-enabled 
MU wakes up at a designated VoIP frame interval, it sends a VoIP frame with an implicit "poll" request 
to its associated access point. The access point responds to the poll request with buffered VoIP 
stream frame(s).

TXOPs Time ms

TXOP times range from 0.2 ms (background priority) to 3 ms (video 
priority) in a 802.11a network, and from 1.2 ms to 6 ms in an 
802.11b/g network. The TXOP bursting capability greatly enhances 
the efficiency for high data rate traffic such as streaming video

NOTE

The access point ships with the U-APSD feature disabled by default. It is 
automatically enabled when WMM is enabled for a WLAN. Thus, U-APSD 
is only functional when WMM is enabled. If WMM is disabled, then 
U-APSD is disabled as well.

Summary of Contents for AP 5131 - Wireless Access Point



























































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments