manualshive.com logo in svg

Motorola AP 5131 - Wireless Access Point, Product Reference Manual

The Motorola AP 5131 Wireless Access Point is a powerful networking solution. This versatile device offers seamless wireless connectivity and high-speed performance. To ensure optimal antenna connection, we provide a comprehensive Antenna Connection Manual. Download this manual for free from our website and explore the full potential of your AP 5131.

Share
Download
background image

ix

Chapter 5. Network Management

Configuring the LAN Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-1

Configuring VLAN Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-5
Configuring LAN1 and LAN2 Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-9

Configuring Advanced DHCP Server Settings . . . . . . . . . . . . . . . . . . . . .5-12
Setting the Type Filter Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . .5-14

Configuring WAN Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-16

Configuring Network Address Translation (NAT) Settings . . . . . . . . . . . . . . .5-21

Configuring Port Forwarding  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-23

Configuring Dynamic DNS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-25

Enabling Wireless LANs (WLANs) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-27

Creating/Editing Individual WLANs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-30

Configuring WLAN Security Policies . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-34

Configuring a WLAN Access Control List (ACL). . . . . . . . . . . . . . . . . . . .5-36
Setting the WLAN Quality of Service (QoS) Policy  . . . . . . . . . . . . . . . . .5-39
Configuring WLAN Hotspot Support . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-45

Setting the WLAN’s Radio Configuration  . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-51

Configuring the 802.11a or 802.11b/g Radio. . . . . . . . . . . . . . . . . . . . . .5-55

Configuring Bandwidth Management Settings . . . . . . . . . . . . . . . . . . . . . . . .5-63

Configuring Router Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-66

Setting the RIP Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-67

Chapter 6. Configuring Access Point Security

Configuring Security Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-2
Setting Passwords . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-3

Resetting the Access Point Password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-4

Enabling Authentication and Encryption Schemes  . . . . . . . . . . . . . . . . . . . . . . . . . .6-5
Configuring Kerberos Authentication. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-8

Configuring 802.1x EAP Authentication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-11
Configuring WEP Encryption. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-16
Configuring KeyGuard Encryption. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-18

Configuring WPA/WPA2 Using TKIP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-21
Configuring WPA2-CCMP (802.11i) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-24
Configuring Firewall Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-27

Configuring LAN to WAN Access  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-30

Summary of Contents for AP 5131 - Wireless Access Point



























































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for AP 5131 - Wireless Access Point

Udoo NEO Step-By-Step Manual preview
NEO
Brand: Udoo Pages: 7
Xinje XS Series User Manual preview
XS Series
Brand: Xinje Pages: 57
Paradyne MCC Installation Instructions Manual preview
MCC
Brand: Paradyne Pages: 11
Paradyne Hotwire 8784 Installation Instructions Manual preview
Hotwire 8784
Brand: Paradyne Pages: 19
Paradyne Hotwire 7995 Installation Instructions Manual preview
Hotwire 7995
Brand: Paradyne Pages: 32
Paradyne COMSPHERE 3550 Series User Manual preview
COMSPHERE 3550 Series
Brand: Paradyne Pages: 153
Paradyne Jetstream CPX-1000 Reference Manual preview
Jetstream CPX-1000
Brand: Paradyne Pages: 141
Paradyne FrameSaver 9783 Installation Instructions Manual preview
FrameSaver 9783
Brand: Paradyne Pages: 28
Radwin Transportation FiberinMotion Deployment Manual preview
Transportation FiberinMotion
Brand: Radwin Pages: 122
Edge-Core SDW100 Quick Start Manual preview
SDW100
Brand: Edge-Core Pages: 7
TP-Link TD-8817 Specifications preview
TD-8817
Brand: TP-Link Pages: 3
ekwb EK-Vector Radeon RX5700 + XT Backplate Installation Manual preview
EK-Vector Radeon RX5700 + XT Backplate
Brand: ekwb Pages: 7
Xilica Audio Design XP 4080 User Manual preview
XP 4080
Brand: Xilica Audio Design Pages: 30
WHOOP WHT-25LT Quick Start Manual preview
WHT-25LT
Brand: WHOOP Pages: 26
ICT Protege PRT-PX16-PCB Installation Manual preview
Protege PRT-PX16-PCB
Brand: ICT Pages: 34
Planet ADSL 2/2+ VPN Firewall Router ADE-4300A/B User Manual preview
ADSL 2/2+ VPN Firewall Router ADE-4300A/B
Brand: Planet Pages: 132
Riverbed SteelCentral NetExpress Installation Manual preview
SteelCentral NetExpress
Brand: Riverbed Pages: 38
Kasda LinkSmart KW6515 User Manual preview
LinkSmart KW6515
Brand: Kasda Pages: 31

Brands by name

Popular brands

Load more brands