manualshive.com logo in svg

Motorola AP 5131 - Wireless Access Point, Product Reference Manual, Page: 106 / 698

Share
Download
Motorola AP 5131 - Wireless Access Point Product Reference Manual Download Page 106

AP-51xx Access Point Product Reference Guide

4-14

9.

Click 

Apply 

to save any changes to the access point Access screen. Navigating away from 

the screen without clicking the Apply button results in all changes to the screen being lost.

10. Click 

Undo Changes 

(if necessary) to undo any changes made. Undo Changes reverts the 

settings displayed on the access point Access screen to the last saved configuration.

11. Click 

Logout 

to securely exit the access point Access Point applet. A prompt displays 

confirming the logout before the applet is closed.

4.4 Managing Certificate Authority (CA) Certificates

Certificate management includes the following sections: 

•

Importing a CA Certificate

•

Creating Self Certificates for Accessing the VPN

4.4.1 Importing a CA Certificate

A 

certificate authority (CA) 

is a network authority that issues and manages security credentials and 

public keys for message encryption. The CA signs all digital certificates that it issues with its own 
private key. The corresponding public key is contained within the certificate and is called a CA 

Summary of Contents for AP 5131 - Wireless Access Point



























































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments