manualshive.com logo in svg

Motorola AP 5131 - Wireless Access Point, Product Reference Manual, Page: 244 / 698

Share
Download
Motorola AP 5131 - Wireless Access Point Product Reference Manual Download Page 244

AP-51xx Access Point Product Reference Guide

6-26

6.

Configure the 

Key Settings

 area as needed to set an ASCII Passphrase and 128-bit key.

Default (hexadecimal) 256-bit keys for WP2A/CCMP include:

1011121314151617

18191A1B1C1D1E1F

2021222324252627

28292A2B2C2D2E2F

7.

Configure the 

WPA2-CCMP Mixed Mode

 

field as needed to allow WPA and WPA2 TKIP 

client interoperation.

8.

Configure the 

Fast Roaming (802.1x only) 

field as required to enable additional access 

point roaming and key caching options. This feature is applicable only when using 802.1x 
EAP authentication with WPA2/CCMP.

ASCII Passphrase 

To use an ASCII passphrase (and not a hexadecimal value), select 
the checkbox enter an alphanumeric string of 8 to 63 characters. 
The string allows character spaces. The 

access point

 converts the 

string to a numeric value. This passphrase saves the administrator 
from entering the 256-bit key each time keys are generated.

256-bit Key

To use a hexadecimal value (and not an ASCII passphrase), select 
the checkbox and enter 16 hexadecimal characters into each of the 
four fields displayed.

Allow 
WPA/WPA2-TKIP 
clients

WPA2-CCMP Mixed Mode enables WPA2-CCMP, WPA-TKIP and 
WPA2-TKIP clients to operate together on the network. Enabling 
this option allows backwards compatibility for clients that support 
WPA-TKIP and WPA2-TKIP but do not support WPA2-CCMP. 
Motorola recommends enabling this feature if WPA-TKIP or 
WPA2-TKIP supported MUs operate within a WLAN populated by 
WPA2-CCMP enabled clients.

Pre-Authentication

Selecting this option enables an associated MU to carry out an 
802.1x authentication with another access point before it roams to 
it. The access point caches the keying information of the client until 
it roams to the other access point. This enables the roaming client 
to start sending and receiving data sooner by not having to do 
802.1x authentication after it roams. This feature is only supported 
when 802.1x EAP authentication is enabled. 

Summary of Contents for AP 5131 - Wireless Access Point



























































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments