manualshive.com logo in svg

Motorola AP 5131 - Wireless Access Point, Product Reference Manual, Page: 133 / 698

Share
Download
Motorola AP 5131 - Wireless Access Point Product Reference Manual Download Page 133

System Configuration

4-41

5.

If using an NTP server to supply system time to the access point, configure the

 

NTP Server 

Configuration

 field to define the server network address information required to acquire 

the access point network time.

6.

Click 

Apply 

to save any changes to the Date and time Settings screen. Navigating away 

from the screen without clicking the Apply button results in all changes to the screen being 
lost.

7.

Click 

Undo Changes 

(if necessary) to undo any changes made. Undo Changes reverts the 

settings displayed on Date and Time Settings screen to the last saved configuration.

CAUTION

If using the Radius time-based authentication feature to authenticate 
access point user permissions, ensure 

UTC

 has been selected from 

the 

Time Zone

 field. If UTC is not selected, time based authentication 

will not work properly. For information on configuring Radius 
time-based authentication, see 

Defining User Access Permissions by 

Group on page 6-76

.

Enable NTP on 

access 

point

Select the 

Enable NTP on 

access point checkbox to allow a 

connection between the access point and one or more specified 
NTP servers. A preferred, first alternate and second alternate NTP 
server cannot be defined unless this checkbox is selected.

Disable this option (uncheck the checkbox) if Kerberos is not in use 
and time synchronization is not necessary.

Preferred Time Server

Specify the numerical (non DNS name) IP address and port of the 
primary NTP server. The default port is 123.

First Alternate Time 
Server

Optionally, specify the numerical (non DNS name) IP address and 
port of an alternative NTP server to use for time synchronization if 
the primary NTP server goes down.

Second Alternate 
Time Server

Optionally, specify the numerical (non DNS name) and port of yet 
another NTP server for the greatest assurance of uninterrupted 
time synchronization.

Synchronization 
Interval

Define an interval in minutes the access point uses to synchronize 
its system time with the NTP server. A synchronization interval 
value from 15 minutes to 65535 minutes can be specified. For 
implementations using Kerberos, a synchronization interval of 15 
minutes (default interval) or sooner is recommended.

!

Summary of Contents for AP 5131 - Wireless Access Point



























































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments