manualshive.com logo in svg

Motorola AP 5131 - Wireless Access Point, Product Reference Manual, Page: 608 / 698

Share
Download
Motorola AP 5131 - Wireless Access Point Product Reference Manual Download Page 608

AP-51xx Access Point Product Reference Guide

9-20

9.3 Mesh Network Deployment - Quick Setup

This section provides instructions on how to quickly setup and demonstrate mesh functionality using 
three access points. Two following two deployment scenarios will be addressed:

•

Scenario 1

 - Two base bridges (redundant) and one client bridge

•

Scenario 2

 - A two hop mesh network with a base bridge, repeater (combined base bridge 

and client bridge mode) and a client bridge.

9.3.1 Scenario 1 - Two Base Bridges and One Client Bridge

A conceptual illustration of scenario one is as follows: 

In scenario 1, the following three access point configurations will be deployed within the mesh 
network:

•

AP#1 - An active base bridge

•

AP#2 - A redundant base bridge

•

AP#3 - A client bridge connecting to both AP#1 and AP#2 simultaneously.

Summary of Contents for AP 5131 - Wireless Access Point



























































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments