manualshive.com logo in svg

Motorola AP 5131 - Wireless Access Point, Product Reference Manual, Page: 314 / 698

Share
Download
Motorola AP 5131 - Wireless Access Point Product Reference Manual Download Page 314

AP-51xx Access Point Product Reference Guide

7-16

3.

Refer to the

 

Traffic 

field to view performance and throughput information for the WLAN 

selected from the access point menu tree.

ESSID

Displays the

 Extended Service Set ID (ESSID)

 for the target WLAN.

Radio/s

Displays the name of the 802.11a or 802.11b/g radio the target 
WLAN is using for access point transmissions.

Authentication Type

Displays the authentication type (802.1x EAP or Kerberos) defined 
for the WLAN. If the authentication type does not match the 
desired scheme for the WLAN or needs to be enabled, see 

Enabling 

Authentication and Encryption Schemes on page 6-5

.

Encryption Type

Displays the encryption method defined for the WLAN. If the 
encryption type does not match the desired scheme for the WLAN 
or needs to be enabled, see 

Enabling Authentication and 

Encryption Schemes on page 6-5

. 

Num. Associated MUs

Displays the total number of MUs currently associated with the 
WLAN. If this number seems excessive, consider segregating MU’s 
to other WLANs if appropriate.

Pkts per second

The 

Total 

column displays the average total packets per second 

crossing the selected WLAN. The 

Rx

 column displays the average 

total packets per second received on the selected WLAN. The

 Tx

 

column displays the average total packets per second sent on the 
selected WLAN. The number in black represents this statistic for 
the last 30 seconds and the number in blue represents this statistic 
for the last hour. 

Throughput

The 

Total 

column displays average throughput in Mbps for a given 

time period on the selected WLAN. The 

Rx

 column displays 

average throughput in Mbps for packets received on the selected 
WLAN. The 

Tx 

column displays average throughput for packets 

sent on the selected WLAN. The number in black represents 
statistics for the last 30 seconds and the number in blue represents 
statistics for the last hour. Use this information to assess whether 
the current access point data rate is sufficient to support required 
network traffic. 

Summary of Contents for AP 5131 - Wireless Access Point



























































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments