manualshive.com logo in svg

Motorola AP 5131 - Wireless Access Point, Product Reference Manual, Page: 265 / 698

Share
Download
Motorola AP 5131 - Wireless Access Point Product Reference Manual Download Page 265

Configuring Access Point Security

6-47

6.11.3 Configuring IKE Key Settings

The 

Internet Key Exchange (IKE) 

is an IPsec standard protocol used to ensure security for VPN 

negotiation and remote host or network access. IKE provides an automatic means of negotiation and 
authentication for communication between two or more parties. In essence, IKE manages IPSec keys 
automatically for the parties. 

To configure IKE key settings for the access point:

1.

Select 

Network Configuration 

-> 

WAN 

-> 

VPN

 from the access point menu tree.

2.

Refer to the 

VPN Tunnel Config

 

field, select the 

Auto (IKE) Key Exchange 

radio button 

and click the 

IKE Settings

 

button.

 

3.

Configure the 

IKE Key Settings

 screen to modify the following:

Summary of Contents for AP 5131 - Wireless Access Point



























































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments