manualshive.com logo in svg

Motorola AP 5131 - Wireless Access Point, Product Reference Manual, Page: 126 / 698

Share
Download
Motorola AP 5131 - Wireless Access Point Product Reference Manual Download Page 126

AP-51xx Access Point Product Reference Guide

4-34

5.

Click 

Undo Changes

 

(if necessary) to undo any changes made. Undo Changes reverts the 

settings displayed on SNMP Trap Configuration screen to the last saved configuration.

6.

Click

 Logout 

to securely exit the access point Access Point applet. A prompt displays 

confirming the logout before the applet is closed.

4.5.3 Configuring Specific SNMP Traps

Use the 

SNMP Traps

 screen to enable specific traps on the access point. Motorola recommends 

defining traps to capture unauthorized devices operating within the access point coverage area. Trap 
configuration depends on the network machine that receives the generated traps. SNMP v1/v2c and 
v3 trap configurations function independently. In a mixed SNMP environment, traps can be sent using 
configurations for both SNMP v1/v2c and v3. To configure specific SNMP traps on the access point:

1.

Select 

System Configuration

 - > 

SNMP Access

 - > 

SNMP Traps

 

from the menu tree.

Summary of Contents for AP 5131 - Wireless Access Point



























































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments