manualshive.com logo in svg

Motorola AP 5131 - Wireless Access Point, Product Reference Manual, Page: 166 / 698

Share
Download
Motorola AP 5131 - Wireless Access Point Product Reference Manual Download Page 166

AP-51xx Access Point Product Reference Guide

5-18

This interface is a 
DHCP Client

This checkbox enables DHCP for the access point WAN connection. 
This is useful, if the larger corporate network or 

Internet Service 

Provider (ISP) 

uses DHCP. 

DHCP is a protocol that includes mechanisms for IP address 
allocation and delivery of host-specific configuration parameters 
from a DHCP server to a host. Some of these parameters are IP 
address, network mask, and gateway.

If DHCP client mode is enabled, the other WAN IP configuration 
parameters are grayed out.

IP Address

Specify a numerical (non DNS name) IP address for the access 
point’s WAN connection. This address defines the AP's presence on 
a larger network or on the Internet.
Obtain a static (dedicated) IP address from the ISP or network 
administrator. An IP address uses a series of four numbers 
expressed in dot notation, for example, 190.188.12.1. 

Subnet Mask

Specify a subnet mask for the access point’s WAN connection. This 
number is available from the ISP for a DSL or cable-modem 
connection, or from an administrator if the access point connects 
to a larger network.
A subnet mask uses a series of four numbers expressed in dot 
notation (similar to an IP address). For example, 255.255.255.0 is a 
valid subnet mask.

Default Gateway

Specify the gateway address for the access point’s WAN 
connection. The ISP or a network administrator provides this 
address.

Primary DNS Server

Specify the address of a primary 

Domain Name System (DNS)

 

server. The ISP or a network administrator provides this address.
A DNS server translates a domain name (for example, 
www.motorola.com) into an IP address that networks can use.

Secondary DNS 
Server

Specify the address of a secondary DNS server if one is used. A 
secondary address is recommended if the primary DNS server goes 
down.

Summary of Contents for AP 5131 - Wireless Access Point



























































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments