Motorola AP 5131 - Wireless Access Point Product Reference Manual Download Page 487

Page: 487 / 698

8-153

AP51xx>admin(system.access)>set

Description:

Defines the permissions to access the access point applet, CLI, SNMP as well as defining their timeout values.

Syntax:

For information on configuring access point access settings using the applet (GUI), see

Configuring Data Access on page 4-9

set applet

Defines the applet HTTP/HTTPS access parameters.

app-timeout

Sets the applet timeout. Default is 300 Mins.

cli

Defines CLI Telnet access parameters. Enables/disables access from lan
and wan.

ssh

Sets the CLI SSH access parameters.

auth-timout

Disables the radio interface if no data activity is detected after the interval
defined. Default is 120 seconds.

inactive-timeout

Inactivity interval resulting in the AP terminating its connection.
Default is 120 minutes.

snmp

Sets SNMP access parameters.

admin-auth

Designates a Radius server is used in the authentication verification.

server

<ip>

Specifies the IP address the Remote Dial-In User Service (RADIUS) server.

port

<port#>

Specifies the port on which the RADIUS server is listening. Default is 1812.

secret

<pw>

Defines the shared secret password for RADIUS server authentication.

mode

<mode>

Enables/disables the access point message mode.

msg

Defines the access point login message text.

Summary of Contents for AP 5131 - Wireless Access Point



























































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for AP 5131 - Wireless Access Point

Reviews:

Motorola AP 5131 - Wireless Access Point, Product Reference Manual, Page: 487 / 698

Search results

Summary of Contents for AP 5131 - Wireless Access Point

Reviews: