manualshive.com logo in svg

Motorola AP 5131 - Wireless Access Point, Product Reference Manual, Page: 165 / 698

Share
Download
Motorola AP 5131 - Wireless Access Point Product Reference Manual Download Page 165

Network Management

5-17

2.

Refer to the 

WAN IP Configuration 

field to enable the WAN interface, and set network 

address information for the WAN connection.

NOTE

Motorola recommends that the WAN and LAN ports should not both be 
configured as DHCP clients.

Enable WAN Interface

Select the 

Enable WAN Interface

 checkbox to enable a 

connection between the 

access point

 and a larger network or 

outside world through the WAN port.
Disable this option to effectively isolate the 

access point

’s WAN. 

No connections to a larger network or the Internet are possible. 
MUs cannot communicate beyond the LAN.
By default, the WAN port is static with an IP address of 10.1.1.1.

Summary of Contents for AP 5131 - Wireless Access Point



























































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments