manualshive.com logo in svg

Motorola AP 5131 - Wireless Access Point, Product Reference Manual, Page: 300 / 698

Share
Download
Motorola AP 5131 - Wireless Access Point Product Reference Manual Download Page 300

AP-51xx Access Point Product Reference Guide

7-2

See the following sections for more details on viewing statistics for the access point:

•

Viewing WAN Statistics

•

Viewing LAN Statistics

•

Viewing Wireless Statistics

•

Viewing Radio Statistics Summary

•

Viewing MU Statistics Summary

•

Viewing the Mesh Statistics Summary

•

Viewing Known Access Point Statistics

7.1 Viewing WAN Statistics

Use the access point 

WAN Stats 

screen to view real-time statistics for monitoring the access point 

activity through its 

Wide Area Network (WAN) 

port.

The

 Information

 

field of the WAN Stats screen displays basic WAN information, generated from 

settings on the WAN screen. The

 Received 

and 

Transmitted 

fields display statistics for the 

cumulative packets, bytes, and errors received and transmitted through the WAN interface since it 
was last enabled or the AP was last rebooted. The access point 

WAN Stats

 screen is view-only with 

no configurable data fields. 

To view access point WAN Statistics:

1.

Select 

Status and Statistics 

->

 

WAN Stats 

from the access point menu tree. 

Summary of Contents for AP 5131 - Wireless Access Point



























































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments