manualshive.com logo in svg

Motorola AP 5131 - Wireless Access Point, Product Reference Manual, Page: 69 / 698

Share
Download
Motorola AP 5131 - Wireless Access Point Product Reference Manual Download Page 69

Hardware Installation

2-25

3.

Attach the square mounting plate to the bridge with the supplied screws.

4.

Attach the AP-5181 and mounting plate to the bracket already fixed to the pole.

5.

Secure the AP-5181 to the pole bracket using the provided nuts. 

6.

Attach the radio antenna to their correct connectors.

NOTE

The AP-5181 tilt angle may need to be adjusted during the antenna 
alignment process. Verify the antenna polarization angle when installing, 
ensure the antennas are oriented correctly in respect to the AP-5181's 
coverage area.

Fit the edges of the
V-shaped part into the slots

Tighten the
securing bolts

Attach the square

plate to the bridge

Summary of Contents for AP 5131 - Wireless Access Point



























































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments