manualshive.com logo in svg

Motorola AP 5131 - Wireless Access Point, Product Reference Manual, Page: 178 / 698

Share
Download
Motorola AP 5131 - Wireless Access Point Product Reference Manual Download Page 178

AP-51xx Access Point Product Reference Guide

5-30

5.3.1 Creating/Editing Individual WLANs

If the WLANs displayed within the 

Wireless Configuration

 screen do not satisfy your network 

requirements, you can either create a new WLAN or edit the properties of an existing WLAN.

Use the New WLAN and Edit WLAN screens as required to create/modify a WLAN. To create a new 
WLAN or edit the properties of an existing WLAN:

1.

Select 

Network Configuration

 -> 

Wireless 

from the access point menu tree. 

The Wireless Configuration screen displays.

2.

Click the 

Create

 button to configure a new WLAN, or highlight a WLAN and click the 

Edit

 

button to modify an existing WLAN. Either the 

New WLAN

 or 

Edit WLAN

 screen displays.

NOTE

Before editing the properties of an existing WLAN, ensure it is not being 
used by an access point radio, or is a WLAN that is needed in its current 
configuration. Once updated, the previous configuration is not available 
unless saved.

Summary of Contents for AP 5131 - Wireless Access Point



























































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments