manualshive.com logo in svg

Motorola AP 5131 - Wireless Access Point, Product Reference Manual, Page: 175 / 698

Share
Download
Motorola AP 5131 - Wireless Access Point Product Reference Manual Download Page 175

Network Management

5-27

7.

Once the DynDNS configuration has been updated, click the 

Show Update Response

 

button to open a sub-screen displaying the hostname, IP address and any messages received 
during an update from the DynDNS Server.

8.

Click 

Apply 

to save any changes to the Dynamic DNS screen. Navigating away from the 

screen without clicking the Apply button results in all changes to the screens being lost.

9.

Click 

Undo Changes

 (if necessary) to undo any changes made. Undo Changes reverts the 

settings displayed on the screen to the last saved configuration.

5.3 Enabling Wireless LANs (WLANs)

A 

Wireless Local Area Network (WLAN)

 is a data-communications system that flexibly extends the 

functionalities of a wired LAN. A WLAN does not require lining up devices for line-of-sight 
transmission, and are thus, desirable. Within the WLAN, roaming users can be handed off from one 
access point to another like a cellular phone system. WLANs can therefore be configured around the 
needs of specific groups of users, even when they are not in physical proximity.

Use the access point’s 

Wireless Configuration 

screen to create new WLANs, edit the properties of 

existing WLANs or delete a WLAN to create space for a new WLAN. Sixteen WLANs are available 
on the access point (regardless of single or dual-radio model). 

To configure WLANs on the access point:

1.

Select 

Network Configuration

 -> 

Wireless 

from the access point menu tree.

NOTE

DynDNS supports devices directly connected to the Internet. Having VPN 
enabled, and the DynDNS Server on the other side of the VPN is not 
supported.

Summary of Contents for AP 5131 - Wireless Access Point



























































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments