manualshive.com logo in svg

Motorola AP 5131 - Wireless Access Point, Product Reference Manual, Page: 311 / 698

Share
Download
Motorola AP 5131 - Wireless Access Point Product Reference Manual Download Page 311

Monitoring Statistics

7-13

2.

Refer to the

 WLAN Summary 

field to reference high-level data for each enabled WLAN.

Name

Displays the names of all the enabled WLANs on the access point. 
For information on enabling a WLAN, see 

Enabling Wireless LANs 

(WLANs) on page 5-27

.

MUs

Displays the total number of MUs currently associated with each 
enabled WLAN. Use this information to assess if the MUs are 
properly grouped by function within each enabled WLAN. To adjust 
the maximum number of MUs permissible per WLAN, see 

Creating/Editing Individual WLANs on page 5-30

.

T-put

Displays the total throughput in Megabits per second (Mbps) for 
each active WLAN. 

ABS

Displays the 

Average Bit Speed (ABS)

 in Megabits per second 

(Mbps) for each active WLAN displayed.

Summary of Contents for AP 5131 - Wireless Access Point



























































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments