Mitsubishi Heavy Industries ESA30E-25, Technical Manual

Page: 6 / 239

- -
'15 • HM-T-246
Parts compatibility
Table1. OK or N O for mounting parts in the specification category A to the specification category B
○ ：
for OK to mount
×
：
for N O
Application to
Specification category B
Table2. OK or N O for mounting parts in the specification category A to the specification category A
○ ：
for OK to mount
×
：
for N O
It has brackets to hook the front panel, but it can be
mounted. It is, however, limited to the front side only.
Front panel
R
：
P CBA
×
Front panel in Category B has hooks so that
it cannot be mounted on conventional models.
L
：
P CBAA
×
P CBA0A
○
Frame P CBAB
○
P arts in category B
Fan guard P CBA0
○
Appearance is changed. (Mesh size of fan guard
in Category B is smaller than that in Category A.)
Side panel
R
：
P CBA00N
○
L
：
P CBA00P
○
Fin guard
P CBA0
○
Appearance is changed. (Fin guard in Category
B has the base section shorter by mm after
the structural change to hook the front panel.)
Frame P CBA
×
Frame in Category A has not brackets to hook
the front panel so that it cannot be mounted.
Item P art N o.
Application to current model
(Specification category A)
Remark
Fin guard
P CBA00
×
Base section of fin guard in Category A is
mm longer. This makes difficult to remove
the front panel so that it cannot be mounted.
P CBA00A
Front panel
R
：
P CBA0
○
L
：
P CBA0C
○
Item P art N o. Remark
P arts in category A
Fan guard P CBA0A
○
Appearance is changed. (Mesh size of fan guard in
Category A is larger than that in Category B.)
Side panel
R: P CBA00D
×
Side panel in Category B has hooks to
hold the front panel. Conventional parts
without the hooks cannot be mounted.
L: P CBA00F
×
×
AMP Air Conditioning www.ampair.co.uk | sales@ampair.co.uk